Establishment Lockout Tagout (LOTO) Quality Manual at Sri Aman Fabrication and Industrial Trading SDN BHD

Authors

  • Zulhaimi Mohammad Advanced Facilities Engineering Technology Research Cluster (AFET), Plant Engineering Technology (PETech) Section, Universiti Kuala Lumpur Malaysian Institute of Industrial Technology, 81750 Masai, Johor, Malaysia
  • Ahmed Mohamed Kadoura Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
  • M.F.M. Alkbir Advanced Facilities Engineering Technology Research Cluster (AFET), Plant Engineering Technology (PETech) Section, Universiti Kuala Lumpur Malaysian Institute of Industrial Technology, 81750 Masai, Johor, Malaysia
  • Shahrul Effendy Kosnan Advanced Facilities Engineering Technology Research Cluster (AFET), Plant Engineering Technology (PETech) Section, Universiti Kuala Lumpur Malaysian Institute of Industrial Technology, 81750 Masai, Johor, Malaysia
  • Sairul Izwan Safie Instrumention and Control Engineering Section, Technology, 81750 Masai, Johor, Malaysia

Keywords:

Lockout Tagout, LOTO Quality Manual, Failure Mode and Effect Analysis (FMEA), Initial Conceptual Sustainable Maintenance Framework Model

Abstract

Lockdown Tagout is a crucial aspect of occupational safety. In fact, it is essential to protect employees and workers near the machinery and equipment they use, maintain, and service. Still, there was information in this study regarding a LOTO system to create a LOTO quality manual at Sri Aman Fabrication and Industrial Trading Sdn Bhd. Observation and interviews have been done in order to collect data from all respective failures. The current study encompassed the entire framework development process, including variable identification, Failure Mode and Effect Analysis (FMEA), implementation of the LOTO quality manual, LOTO training programme, and procedure, and, at the end, the creation of an initial conceptual model for a sustainable maintenance framework.

Downloads

Download data is not yet available.

References

T. Live and A. Training, “LA-UR-17-21059 Title : Author ( s ): Intended for : Issued :,” 2017.

A. Lockout, “WHY LOCKOUT / TAGOUT ? SIX STEPS PROCESS OF LOCKOUT / TAGOUT : LOCKOUT / TAGOUT LOCKOUT / TAGOUT.”

J. Furman, “Work Safety Improvement Within Autonomous Maintenance,” Multidiscip. Asp. Prod. Eng., vol. 3, no. 1, pp. 161–171, 2020, doi: 10.2478/mape-2020-0014.

E. Aghenta, “Mitigating risks associated with Lockout / Tagout ( LOTO ) of Hazardous Energy in Nigeria - A tracker approach,” no. October, 2012.

O. O. Ogungbe, “The Implementation of Hazardous Energy Control (Lockout/Tagout) Program at XYZ Inc.,Plymouth, Minnesota,” pp. 1–85, 2013.

Y. Chinniah and D. Burlet-Vienney, “Study on lockout procedures for the safety of workers intervening on equipment in the municipal sector in Québec,” Int. J. Occup. Saf. Ergon., vol. 19, no. 4, pp. 495–511, 2013, doi: 10.1080/10803548.2013.11077007.

Dewi, L. T. (2018). Investigation of Lockout/Tagout procedure failure in machine maintenance process. Jurnal Teknik Industri, 20(2), 135-140.

Illankoon, P., Manathunge, Y., Tretten, P., Abeysekara, J., & Singh, S. (2019). Lockout and tagout in a manufacturing setting from a situation awareness perspective. Safety, 5(2), 25.

Dźwiarek, M. (2022). Application of lockout/tagout procedures in production systems of Industry 4.0. Journal of KONBiN, 52(3), 137-148.

Ravi, M., Sridharan, P., & Senthilkumar, V. K. (2018). Implementation strategy of lock out and tag out (LOTO) electrical systems for paper industry. International Journal of Applied Science and Engineering, 6(1), 1.

Downloads

Published

27.12.2023

How to Cite

Mohammad, Z. ., Kadoura, A. M. ., Alkbir, M. ., Kosnan, S. E. ., & Safie, S. I. . (2023). Establishment Lockout Tagout (LOTO) Quality Manual at Sri Aman Fabrication and Industrial Trading SDN BHD. International Journal of Intelligent Systems and Applications in Engineering, 12(9s), 128–135. Retrieved from https://www.ijisae.org/index.php/IJISAE/article/view/4212

Issue

Vol. 12 No. 9s (2024)

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.

IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.

Most read articles by the same author(s)